Tag Archives: supplier shaft

China supplier CNC Machine Hydraulic Shaft Machine Part Transmission Shaft Drive Shaft drive shaft ends

Product Description

Company  Profile

Established in 2009, HangZhou CZPT Trading Co., Ltd is a professional supplier for conveyor parts, located in ZHangZhoug province. We focus on supplying a variety of conveyor parts, including conveyor tubes, conveyor frames, conveyor rollers, bearing housings and so forth.

With our professional technology R&D team, and experienced quality control department, our products have been awarded the ISO9001 Quality Management System Standard and our main markets are in America, Europe, Asia and Australia.

Factory advantage

Professional and experienced technology team
All products inspected before shipping with reasonable prices
Low MOQ and free sample
We are audited by SGS and passed the ISO9001:2008 certification

Industries service

Industrial machine
Electronic and communication
Oil, gas,mining and petroleum
Construction industry
Equipment CNC Machining Center, CNC Lathes, CNC Milling Machines, Punching and drilling machines,  Stamping machines
Precision Processing CNC machining, CNC turning and milling, laser cutting, drilling, grinding, bending, stamping, welding

 

 

Roller size

 No. Standard Diameter Length Range
(mm)
Bearing Type
Min-Max
Shell Thickness of Roller
   mm Inch      
1 63.5 2 1/2 150-3500 203 204 3.0mm-4.0mm
2 76 3 150-3500 204 3.0mm-4.5mm
3 89 3 1/3 150-3500 204 205 3.0mm-4.5mm
4 102 4 150-3500 3.2mm-4.5mm
5 108 4 1/4 150-3500 306 3.5mm-4.5mm
6 114 4 1/2 150-3500 306 3.5mm-4.5mm
7 127 5 150-3500 306 3.5mm-5.0mm
8 133 5 1/4 150-3500 305 306 3.5mm-5.0mm
9 140 5 1/2 150-3500 306 307 3.5mm-5.0mm
10 152 6 150-3500 4.0mm-5.0mm
11 159 6 1/4 150-3500 4.0mm-5.0mm
12 165 6 1/2 150-3500 307 308 4.5mm-6.0mm
13 177.8 7 150-3500 309 4.5mm-6.0mm
14 190.7 7 1/2 150-3500 309 310 4.5mm-7.0mm
15 194 7 5/8 150-3500 309 310 4.5mm-8.0mm
16 219 8 5/8 150-3500 4.5mm-8.0mm

Advantage:
1.The life time: More than 50000 hours
2. TIR (Total Indicator Runout)
0.5mm (0.0197″) for Roll Length 0-600mm
0.8mm (0.571″) for Roll Length 601-1350mm
1.0mm (0. 0571 “) for Roll Length over 1350mm
3.Shaft Float≤0.8mm
4..Samples for testing are available.
5. Lower resistance
6. Small maintain work
7. High load capability
8. Dust proof & water proof

 

CONVRYOR ROLLER SHAFTS

We can produce roller shafts and We do customeized 
Product Size:φ10mm – 70mm
Max Length: 3000mm
Surface Tolerance: g6
Surface Roughness:0.8mm

 

Specification ASTM A108   AS1443
Steel Grade  Q235B,C1571,C1045(we can also do other steel grade per your requirments)
Size Φ18mm-φ62mm
Diameter Tolerance  ISO286-2,H7/H8
Straightness 2000:1

O.D  63.5-219.1mm
W .T  0.45-20mm 
Length  6–12m
Standard  SANS 657/3,ASTM 513,AS 1163,BS6323,EN10305
Material  Q235B, S355,S230,C350,E235 etc. 
Technique  Welded,Seamless
Surface oiled ,galvanized or painted with all kinds of colors according to client’s request.
 Ends  1.Plain ends,
 2.Threading at both side with plastice caps 
 3.Threading at both side with socket/coupling.
 4.Beveled ends, and so on
 Packing  1.Water-proof plastic cloth,
 2.Woven bags, 
 3.PVC package, 
 4.Steel strips in bundles 
 5.As your requirment
Usage   1.For low pressure liquid delivery such as water,gas and oil.
 2.For construction
 3.Mechanical equipment
 4.For Furniture 
Payment&Trade Terms  1.Payment : T/T,L/C, D/P, Western union 
 2.Trade Terms:FOB/CFR/CIF
 3.Minimum quantity of order : 10 MT (10,000KGS)
 Delivery Time  1.Usually,within10-20days after receiving your down payment.
 2.According to the order quantity 

 

Conveyor Roller Tube

Conveyor Roller Tube

Specification SANS657/3,ASTM513,AS1163,BS6323,EN10305 or equivalent international standard.
Steel grade S355/S230,C350,E235,Q235B
Sizes 63.5mm-219.1mm ect
Ovality tolerance of body ≤0.4mm(60.3mm-152.4mm)
≤0.5mm(159MM-168.3mm)
≤0.6mm(178mm-219mm)
Straightness 2000:1

 

 

 

if you are interesting in our products or want any further information, please feel free to contact us!

I am looking CZPT to your reply.

Best regards
Ruth
HangZhou CZPT TRADING CO., LTD 
1801 CZPT Building, No.268 Xierhuan Road, HangZhou City, ZHangZhoug Province, China

Steel Grade: C1018 C1020
Standard: ASTM A108
Size: Od18mm—62mm
Surface Tolerance: G6
Max Length: 3000mm
Surface Roughness: 0.8
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

How to tell if your driveshaft needs replacing

What is the cause of the unbalanced drive shaft? Unstable U-joint? Your car may make clicking noises while driving. If you can hear it from both sides, it might be time to hand it over to the mechanic. If you’re not sure, read on to learn more. Fortunately, there are many ways to tell if your driveshaft needs replacing.

unbalanced

An unbalanced driveshaft can be the source of strange noises and vibrations in your vehicle. To fix this problem, you should contact a professional. You can try a number of things to fix it, including welding and adjusting the weight. The following are the most common methods. In addition to the methods above, you can use standardized weights to balance the driveshaft. These standardized weights are attached to the shaft by welders.
An unbalanced drive shaft typically produces lateral vibrations per revolution. This type of vibration is usually caused by a damaged shaft, missing counterweights, or a foreign object stuck on the drive shaft. On the other hand, torsional vibrations occur twice per revolution, and they are caused by shaft phase shifts. Finally, critical speed vibration occurs when the RPM of the drive shaft exceeds its rated capacity. If you suspect a driveshaft problem, check the following:
Manually adjusting the imbalance of a drive shaft is not the easiest task. To avoid the difficulty of manual balancing, you can choose to use standardized weights. These weights are fixed on the outer circumference of the drive shaft. The operator can manually position the weight on the shaft with special tools, or use a robot. However, manual balancers have many disadvantages.
air-compressor

unstable

When the angular velocity of the output shaft is not constant, it is unstable. The angular velocity of the output shaft is 0.004 at ph = 29.5 and 1.9 at t = 1.9. The angular velocity of the intermediate shaft is not a problem. But when it’s unstable, the torque applied to it is too much for the machine. It might be a good idea to check the tension on the shaft.
An unstable drive shaft can cause a lot of noise and mechanical vibration. It can lead to premature shaft fatigue failure. CZPT studies the effect of shaft vibration on the rotor bearing system. They investigated the effect of flex coupling misalignment on the vibration of the rotor bearing system. They assume that the vibrational response has two components: x and y. However, this approach has limited application in many situations.
Experimental results show that the presence of cracks in the output shaft may mask the unbalanced excitation characteristics. For example, the presence of superharmonic peaks on the spectrum is characteristic of cracks. The presence of cracks in the output shaft masks unbalanced excitation characteristics that cannot be detected in the transient response of the input shaft. Figure 8 shows that the frequency of the rotor increases at critical speed and decreases as the shaft passes the natural frequency.

Unreliable

If you’re having trouble driving your car, chances are you’ve run into an unreliable driveshaft. This type of drivetrain can cause the wheels to stick or not turn at all, and also limit the overall control of the car. Whatever the reason, these issues should be resolved as soon as possible. Here are some symptoms to look for when diagnosing a driveshaft fault. Let’s take a closer look.
The first symptom you may notice is an unreliable drive shaft. You may feel vibrations, or hear noises under the vehicle. Depending on the cause, it could be a broken joint or a broken shaft. The good news is that driveshaft repairs are generally relatively inexpensive and take less time than a complete drivetrain replacement. If you’re not sure what to do, CZPT has a guide to replacing the U-connector.
One of the most common signs of an unreliable driveshaft is clanging and vibration. These sounds can be caused by worn bushings, loose U-joints, or damaged center bearings. This can cause severe vibration and noise. You can also feel these vibrations through the steering wheel or the floor. An unreliable driveshaft is a symptom of a bigger problem.
air-compressor

Unreliable U-joints

A car with an unreliable U-joint on the drive shaft can be dangerous. A bad u-joint can prevent the vehicle from driving properly and may even cause you trouble. Unreliable u-joints are cheap to replace and you should try getting parts from quality manufacturers. Unreliable U-joints can cause the car to vibrate in the chassis or gear lever. This is a sure sign that your car has been neglected in maintenance.
Replacing a U-joint is not a complicated task, but it requires special tools and a lot of elbow grease. If you don’t have the right tools, or you’re unfamiliar with mechanical terminology, it’s best to seek the help of a mechanic. A professional mechanic will be able to accurately assess the problem and propose an appropriate solution. But if you don’t feel confident enough, you can replace your own U-connector by following a few simple steps.
To ensure the vehicle’s driveshaft is not damaged, check the U-joint for wear and lubrication. If the U-joint is worn, the metal parts are likely to rub against each other, causing wear. The sooner a problem is diagnosed, the faster it can be resolved. Also, the longer you wait, the more you lose on repairs.

damaged drive shaft

The driveshaft is the part of the vehicle that connects the wheels. If the driveshaft is damaged, the wheels may stop turning and the vehicle may slow down or stop moving completely. It bears the weight of the car itself as well as the load on the road. So even a slight bend or break in the drive shaft can have dire consequences. Even a piece of loose metal can become a lethal missile if dropped from a vehicle.
If you hear a screeching noise or growl from your vehicle when shifting gears, your driveshaft may be damaged. When this happens, damage to the u-joint and excessive slack in the drive shaft can result. These conditions can further damage the drivetrain, including the front half. You should replace the driveshaft as soon as you notice any symptoms. After replacing the driveshaft, you can start looking for signs of wear.
A knocking sound is a sign of damage to the drive shaft. If you hear this sound while driving, it may be due to worn couplings, damaged propshaft bearings, or damaged U-joints. In some cases, the knocking noise can even be caused by a damaged U-joint. When this happens, you may need to replace the entire driveshaft, requiring a new one.
air-compressor

Maintenance fees

The cost of repairing a driveshaft varies widely, depending on the type and cause of the problem. A new driveshaft costs between $300 and $1,300, including labor. Repairing a damaged driveshaft can cost anywhere from $200 to $300, depending on the time required and the type of parts required. Symptoms of a damaged driveshaft include unresponsiveness, vibration, chassis noise and a stationary car.
The first thing to consider when estimating the cost of repairing a driveshaft is the type of vehicle you have. Some vehicles have more than one, and the parts used to make them may not be compatible with other cars. Even if the same car has two driveshafts, the damaged ones will cost more. Fortunately, many auto repair shops offer free quotes to repair damaged driveshafts, but be aware that such work can be complicated and expensive.

China supplier CNC Machine Hydraulic Shaft Machine Part Transmission Shaft Drive Shaft   drive shaft ends	China supplier CNC Machine Hydraulic Shaft Machine Part Transmission Shaft Drive Shaft   drive shaft ends
editor by CX